Remove-DhcpServerv4ExclusionRange
Deletes a range of IPv4 addresses that were previously excluded from an IPv4 scope.
Syntax
Default (Default)
Remove-DhcpServerv4ExclusionRange
[-ComputerName <String>]
[-ScopeId] <IPAddress>
[[-StartRange] <IPAddress>]
[[-EndRange] <IPAddress>]
[-Passthru]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Remove-DhcpServerv4ExclusionRange cmdlet deletes a range of IPv4 addresses that were previously excluded from an IPv4 scope. If the StartRange and EndRange parameters are specified, the exclusion range with the specified starting range and ending range is deleted. If only the StartRange parameter is specified, the exclusion range with specified starting range is deleted. If only the EndRange parameter is specified, the exclusion range with specified ending range is deleted. If neither the StartRange nor the EndRange parameter is specified, all exclusion ranges in the specified scope are deleted.
Examples
Example 1: Delete all of the excluded address ranges
PS C:\> Remove-DhcpServerv4ExclusionRange -ComputerName "dhcpserver.contoso.com" -ScopeId 10.10.10.0
This example deletes all of the excluded IPv4 address ranges on the specified DHCP server service.
Example 2: Delete a specified excluded address range
PS C:\> Remove-DhcpServerv4ExclusionRange -ComputerName "dhcpserver.contoso.com" -ScopeId 10.10.10.0 -StartRange 10.10.10.1 -EndRange 10.10.10.10
This example deletes the excluded IPv4 address range from 10.10.10.1 through 10.10.10.10 from the specified scope on the specified DHCP server service.
Example 3: Delete an excluded address range that starts with a specified address
PS C:\> Remove-DhcpServerv4ExclusionRange -ComputerName "dhcpserver.contoso.com" -ScopeId 10.10.10.0 -StartRange 10.10.10.1
This example deletes the excluded IPv4 address range starting with IPv4 address 10.10.10.1 from the specified scope on the specified DHCP server service.
Example 4: Delete an excluded address range that ends with a specified address
PS C:\> Remove-DhcpServerv4ExclusionRange -ComputerName "dhcpserver.contoso.com" -ScopeId 10.10.10.0 -EndRange 10.10.10.10
This example deletes the excluded IPv4 address range ending with IPv4 address 10.10.10.10 from the specified scope on the specified DHCP server service.
Parameters
-AsJob
Runs the cmdlet as a background job.
Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt.
You can continue to work in the session while the job completes.
To manage the job, use the *-Job cmdlets.
To get the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShell® background jobs, see about_Jobs.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Parameter properties
| Type: | CimSession[] |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Session |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ComputerName
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer that runs the Dynamic Host Configuration Protocol (DHCP) server service.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | Cn |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-EndRange
Specifies the ending IPv4 address of the excluded IP range which is to be deleted.
Parameter properties
| Type: | IPAddress |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 3 |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-Passthru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ScopeId
Specifies the scope identifier (ID), in IPv4 address format, from which the exclusion ranges are to be deleted.
Parameter properties
| Type: | IPAddress |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 1 |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-StartRange
Specifies the starting IPv4 address of the excluded IP range which is to be deleted.
Parameter properties
| Type: | IPAddress |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | 2 |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | True |
| Value from remaining arguments: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
| Type: | Int32 |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Outputs
CimInstance
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.