The Stop-PcsvDevice cmdlet shuts down a remote hardware device by using Web Services for Management (WS-Management) or Intelligent Platform Management Interface (IPMI).
The cmdlet puts the device in the Disabled state, which corresponds to a hard shutdown of the hardware device.
Specify the remote hardware device by the management name or IP address, provide credentials necessary to shut down the remote hardware device, and specify which management protocol to use.
The credentials must have administrator permissions on the remote hardware device.
The first command uses the Get-Credential cmdlet to create a credential, and then stores it in the $Credential variable.
The cmdlet prompts you for a user name and password.
For more information, type Get-Help Get-Credential.
The second command shuts down the computer that has the management IP address 10.1.12.43 by using the IPMI management protocol.
The command specifies the credential object, stored in the $Credential variable, needed to connect to the computer.
By default, the cmdlet prompts you before it stops the remote hardware device.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Parameter properties
Type:
SwitchParameter
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-Authentication
Specifies an authentication method to use for devices managed by using WS-Management.
Do not specify this parameter for devices managed by using IPMI.
The acceptable values for this parameter are:
Basic
Digest
Default
If you specify Default for this parameter and a value of WSMAN for the ManagementProtocol parameter, the cmdlet uses Basic authentication.
Parameter properties
Type:
Authentication
Default value:
None
Accepted values:
Default, Basic, Digest
Supports wildcards:
False
DontShow:
False
Parameter sets
ByComputerName
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-CimSession
Runs the cmdlet in a remote session or on a remote computer.
Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet.
The default is the current session on the local computer.
Parameter properties
Type:
CimSession[]
Default value:
None
Supports wildcards:
False
DontShow:
False
Aliases:
Session
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
Type:
SwitchParameter
Default value:
False
Supports wildcards:
False
DontShow:
False
Aliases:
cf
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-Credential
Specifies a PSCredential object based on a user name and password.
To obtain a PSCredential object, use the Get-Credential cmdlet.
For more information, type Get-Help Get-Credential.
This parameter specifies the credential for the remote hardware device.
Parameter properties
Type:
PSCredential
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
ByComputerName
Position:
2
Mandatory:
True
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-InputObject
Specifies the input object that is used in a pipeline command.
Parameter properties
Type:
CimInstance[]
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
InputObject (cdxml)
Position:
Named
Mandatory:
True
Value from pipeline:
True
Value from pipeline by property name:
False
Value from remaining arguments:
False
-ManagementProtocol
Specifies a management protocol used to communicate with a device.
The acceptable values for this parameter are:
WSMAN
IPMI
Refer to your hardware documentation for supported management protocols.
Specify WSMAN for devices that represent information by using Systems Management Architecture for Server Hardware (SMASH), Desktop and mobile Architecture for System Hardware (DASH), or Physical Computer System View profiles.
Parameter properties
Type:
ManagementProtocol
Default value:
None
Accepted values:
WSMan, IPMI
Supports wildcards:
False
DontShow:
False
Aliases:
MP
Parameter sets
ByComputerName
Position:
3
Mandatory:
True
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-PassThru
Returns an object representing the item with which you are working.
By default, this cmdlet does not generate any output.
Parameter properties
Type:
SwitchParameter
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-Port
Specifies a port on the remote computer to use for the management connection.
If you do not specify a port, the cmdlet uses the following default values:
IPMI and WSMAN over HTTP.
Port 623.
WSMAN over HTTPS.
Port 664.
Parameter properties
Type:
UInt16
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
ByComputerName
Position:
4
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-ShutdownType
The Stop-PcsvDevice cmdlet shuts down a remote hardware device by using Web Services for Management (WS-Management) or Intelligent Platform Management Interface (IPMI).
The cmdlet puts the device in the Disabled state, which corresponds to a hard shutdown of the hardware device.
Specify the remote hardware device by the management name or IP address, provide credentials necessary to shut down the remote hardware device, and specify which management protocol to use.
The credentials must have administrator permissions on the remote hardware device.
Parameter properties
Type:
PossibleShutdownTypes
Default value:
None
Accepted values:
Forced, Graceful
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-SkipCACheck
Indicates that the client connects by using HTTPS without validating that a trusted CA signed the server certificate.
Do not specify this parameter if you specify a value of IPMI for the ManagementProtocol parameter.
Do not specify this parameter unless you can establish trust in another way, such as if the remote computer is part of a network that is physically secure and isolated, or if the remote computer is a trusted host in a Windows Remote Management (WinRM) configuration.
Parameter properties
Type:
SwitchParameter
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
ByComputerName
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-SkipCNCheck
Indicates that the certificate CN of the server does not need to match the host name of the server.
Do not specify this parameter if you specify a value of IPMI for the ManagementProtocol parameter.
Specify this parameter only for managing devices by using WS-Management over HTTPS.
Be sure to specify this parameter only for trusted computers.
Parameter properties
Type:
SwitchParameter
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
ByComputerName
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-SkipRevocationCheck
Indicates that the cmdlet skips the revocation check of server certificates.
Do not specify this parameter if you specify a value of IPMI for the ManagementProtocol parameter.
Be sure to specify this parameter only for trusted computers.
Parameter properties
Type:
SwitchParameter
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
ByComputerName
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-TargetAddress
Specifies the name or IP address of the management port on the remote hardware device.
For server hardware, this is typically a dedicated Baseboard Management Controller (BMC) IP address.
For other devices, like network switches, this is the IP address of their management port.
For desktop and mobile devices, the BMC sometimes shares the same IP address as the computer.
Parameter properties
Type:
String
Default value:
None
Supports wildcards:
False
DontShow:
False
Aliases:
CN, ComputerName, IpAddress
Parameter sets
ByComputerName
Position:
1
Mandatory:
True
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Parameter properties
Type:
Int32
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
-TimeoutSec
Specifies how long to wait, in seconds, for a response from the remote hardware device.
After this period, the cmdlet abandons the connection attempt.
Parameter properties
Type:
UInt32
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
ByNoConnectionParams
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
ByComputerName
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-UseSSL
Indicates that the server connects to the target computer by using SSL.
WSMAN encrypts all content transmitted over the network.
Specify this parameter to use the additional protection of HTTPS instead of HTTP.
If you specify this parameter and SSL is not available on the connection port, the command fails.
Parameter properties
Type:
SwitchParameter
Default value:
None
Supports wildcards:
False
DontShow:
False
Parameter sets
ByComputerName
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
True
Value from remaining arguments:
False
-WhatIf
Shows what would happen if the cmdlet runs.
The cmdlet is not run.
Parameter properties
Type:
SwitchParameter
Default value:
False
Supports wildcards:
False
DontShow:
False
Aliases:
wi
Parameter sets
(All)
Position:
Named
Mandatory:
False
Value from pipeline:
False
Value from pipeline by property name:
False
Value from remaining arguments:
False
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable,
-InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable,
-ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see
about_CommonParameters.