New-CMWindowsFirewallPolicy
Creates a new Windows Firewall policy in Configuration Manager.
Syntax
Default (Default)
New-CMWindowsFirewallPolicy
[-Description <String>]
[-DomainBlockAllInboundTraffic <SettingType>]
[-DomainNotification <SettingType>]
[-DomainTurnOnFirewall <SettingType>]
-Name <String>
[-PrivateBlockAllInboundTraffic <SettingType>]
[-PrivateNotification <SettingType>]
[-PrivateTurnOnFirewall <SettingType>]
[-PublicBlockAllInboundTraffic <SettingType>]
[-PublicNotification <SettingType>]
[-PublicTurnOnFirewall <SettingType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The New-CMWindowsFirewallPolicy cmdlet creates a configuration policy for Windows Firewall in Configuration Manager.
Windows Firewall allows or denies incoming connections to an IP address. The blocking actions allow or deny incoming traffic based on a network location type. The network location types are: domain, public, and private.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1: Create a Windows Firewall policy
PS XYZ:\> New-CMWindowsFirewallPolicy -Name "test01" -Description "323132" -DomainTurnOnFirewall Yes -PrivateTurnOnFirewall Yes -PublicTurnOnFirewall Yes
This command creates a new Windows Firewall policy and enables the firewall for domain, private, and public network location types.
Parameters
-Confirm
Prompts you for confirmation before running the cmdlet.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | cf |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Description
Specifies a description for the firewall policy.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | LocalizedDescription |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainBlockAllInboundTraffic
Specifies whether to block all incoming traffic for a domain type of network location.The acceptable values for this parameter are:
- No
- Not Configured
- Yes
Parameter properties
| Type: | SettingType |
| Default value: | None |
| Accepted values: | Yes, No, NotConfigured |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainNotification
The New-CMWindowsFirewallPolicy cmdlet creates a configuration policy for Windows Firewall in Configuration Manager.
Windows Firewall allows or denies incoming connections to an IP address. The blocking actions allow or deny incoming traffic based on a network location type. The network location types are: domain, public, and private.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SettingType |
| Default value: | None |
| Accepted values: | Yes, No, NotConfigured |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | DomainNotifications |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-DomainTurnOnFirewall
Specifies whether to turn on a firewall for a domain type of network location. The acceptable values for this parameter are:
- No
- Not Configured
- Yes
Parameter properties
| Type: | SettingType |
| Default value: | None |
| Accepted values: | Yes, No, NotConfigured |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
Parameter properties
| Type: | SwitchParameter |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-Name
Specifies a name for the firewall policy in Configuration Manager.
Parameter properties
| Type: | String |
| Default value: | None |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | LocalizedDisplayName |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | True |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PrivateBlockAllInboundTraffic
Specifies whether to block all incoming traffic for a private type of network location. The acceptable values for this parameter are:
- No
- Not Configured
- Yes
Parameter properties
| Type: | SettingType |
| Default value: | None |
| Accepted values: | Yes, No, NotConfigured |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PrivateNotification
The New-CMWindowsFirewallPolicy cmdlet creates a configuration policy for Windows Firewall in Configuration Manager.
Windows Firewall allows or denies incoming connections to an IP address. The blocking actions allow or deny incoming traffic based on a network location type. The network location types are: domain, public, and private.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SettingType |
| Default value: | None |
| Accepted values: | Yes, No, NotConfigured |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | PrivateNotifications |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PrivateTurnOnFirewall
Specifies whether to turn on a firewall for a private type of network location. The acceptable values for this parameter are:
- No
- Not Configured
- Yes
Parameter properties
| Type: | SettingType |
| Default value: | None |
| Accepted values: | Yes, No, NotConfigured |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PublicBlockAllInboundTraffic
Specifies whether to block all incoming traffic for a public type of network location. The acceptable values for this parameter are:
- No
- Not Configured
- Yes
Parameter properties
| Type: | SettingType |
| Default value: | None |
| Accepted values: | Yes, No, NotConfigured |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PublicNotification
The New-CMWindowsFirewallPolicy cmdlet creates a configuration policy for Windows Firewall in Configuration Manager.
Windows Firewall allows or denies incoming connections to an IP address. The blocking actions allow or deny incoming traffic based on a network location type. The network location types are: domain, public, and private.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Parameter properties
| Type: | SettingType |
| Default value: | None |
| Accepted values: | Yes, No, NotConfigured |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | PublicNotifications |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-PublicTurnOnFirewall
Specifies whether to enable Windows Firewall for a public network location. The acceptable values for this parameter are:
- No
- Not Configured
- Yes
Parameter properties
| Type: | SettingType |
| Default value: | None |
| Accepted values: | Yes, No, NotConfigured |
| Supports wildcards: | False |
| DontShow: | False |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
Parameter properties
| Type: | SwitchParameter |
| Default value: | False |
| Supports wildcards: | False |
| DontShow: | False |
| Aliases: | wi |
Parameter sets
(All)
| Position: | Named |
| Mandatory: | False |
| Value from pipeline: | False |
| Value from pipeline by property name: | False |
| Value from remaining arguments: | False |
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutBuffer, -OutVariable, -PipelineVariable, -ProgressAction, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.