Edit

Share via

How to transfer payloads between devices and DPS

Devices that register with DPS are required to provide a registration ID and valid credentials (keys or X.509 certificates) when they register. However, there might be IoT solutions or scenarios in which more data is needed from the device. For example, a custom allocation policy webhook might use information like a device model number to select an IoT hub to provision the device to. Likewise, a device might require more data in the registration response to facilitate its client-side logic. DPS provides the capability for devices to both send and receive an optional payload when they register.

When to use it

Common scenarios for sending optional payloads are:

  • Custom allocation policies can use the device payload to help select an IoT hub for a device or set its initial twin. For example, you might want to allocate your devices based on the device model. In this case, you can configure the device to report its model information when it registers. DPS passes the device’s payload to the custom allocation webhook. Then your webhook can decide which IoT hub the device is provisioned to based on the device model information. If needed, the webhook can also return data back to the device as a JSON object in the webhook response. To learn more, see Use device payloads in custom allocation.

  • IoT Plug and Play (PnP) devices might use the payload to send their model ID when they register with DPS. You can find examples of this usage in the PnP samples in the SDK or sample repositories. For example, C# PnP thermostat or Node.js PnP temperature controller.

  • IoT Central devices that connect through DPS should follow IoT Plug and Play conventions and send their model ID when they register. IoT Central uses the model ID to assign the device to the correct device template. To learn more, see Device implementation and best practices for IoT Central.

Device sends data payload to DPS

When your device calls Register Device to register with DPS, it can include more data in the payload property. For example, the following JSON shows the body for a request to register using TPM attestation:

{ 
    "registrationId": "mydevice", 
    "tpm": { 
        "endorsementKey": "xxxx-device-endorsement-key-xxxx", 
        "storageRootKey": "xxx-device-storage-root-key-xxxx" 
    }, 
    "payload": { A JSON object that contains your additional data } 
}

The payload property must be a JSON object and can contain any data relevant to your IoT solution or scenario.

DPS returns data to the device

DPS can return data back to the device in the registration response. Currently, this feature is exclusively used in custom allocation scenarios. If the custom allocation policy webhook needs to return data to the device, it can pass the data back as a JSON object in the webhook response. DPS then passes that data back in the registrationState.payload property in the Register Device response. For example, the following JSON shows the body of a successful response to register using TPM attestation.

{
   "operationId":"5.316aac5bdc130deb.b1e02da8-xxxx-xxxx-xxxx-7ea7a6b7f550",
   "status":"assigned",
   "registrationState":{
      "registrationId":"my-tpm-device",
      "createdDateTimeUtc":"2022-08-31T22:02:50.5163352Z",
      "assignedHub":"sample-iot-hub-1.azure-devices.net",
      "deviceId":"my-tpm-device",
      "status":"assigned",
      "substatus":"initialAssignment",
      "lastUpdatedDateTimeUtc":"2022-08-31T22:02:50.7370676Z",
      "etag":"xxxx-etag-value-xxxx",
      "tpm": {"authenticationKey": "xxxx-encrypted-authentication-key-xxxxx"},
      "payload": { A JSON object that contains the data returned by the webhook }
   }
}

The payload property must be a JSON object and can contain any data relevant to your IoT solution or scenario.

SDK support

This feature is available in C, C#, JAVA and Node.js client SDKs. To learn more about the Azure IoT SDKs available for IoT Hub and IoT Hub Device Provisioning service, see Microsoft Azure IoT SDKs.

IoT Edge support

Starting with version 1.4, IoT Edge supports sending a data payload contained in a JSON file. The payload file is read and sent to DPS when the device is (re)registered which typically happens when you run iotedge config apply for the first time. You can also force it to be re-read and registered by using the CLI's reprovision command iotedge system reprovision.

The following example is a snippet from /etc/aziot/config.toml, where the payload property is set to the path of a local JSON file.

   [provisioning]
   source = "dps"
   global_endpoint = "https://global.azure-devices-provisioning.net"
   id_scope = "0ab1234C5D6"

   # Uncomment to send a custom payload during DPS registration
   payload = { uri = "file:///home/aziot/payload.json" }

The payload file (in this case /home/aziot/payload.json) can contain any valid JSON such as:

{
    "modelId": "dtmi:com:example:edgedevice;1"
}

Next steps