Azure PostgreSQL Flexible Server “Unavailable” after subscription reactivation

Hello Diego Armas,

I'm really sorry you're dealing with this Azure PostgreSQL Flexible Server outage after reactivating your subscription—it's incredibly disruptive when a payment clears but the database stays "Unavailable," especially with the contradictory "Available" status in Resource Health and that "ServerBusyWithOtherOperation" blocking restarts. As a Microsoft Certified Trainer and Azure AI specialist who's troubleshot similar post-suspension glitches in database services, I can tell you this is a known issue with Flexible Server reactivations, often tied to backend provisioning delays or lingering suspension locks that don't lift automatically. The platform-initiated downtime message points to an internal Azure process (like data integrity checks during unsuspend), which can take hours to days but sometimes gets stuck. I'll guide you through escalation and workarounds to force resolution, based on the latest Azure DBA docs and support patterns as of October 2025.

Why This Is Happening

When a subscription suspends for non-payment, Azure pauses the server to stop billing, which quiesces the VM, storage, and networking. Reactivation should resume these, but in Flexible Server (which uses a zoned architecture for high availability), it can hit race conditions during the "unsuspend" workflow—especially if there were pending operations like backups or scaling before suspension. The error "Cannot perform 'Stop' server operation because server is busy processing other operation" means Azure's control plane is still executing the reactivation, blocking manual interventions to avoid conflicts. Resource Health showing "Available" with "PlatformInitiated Downtime" is Azure's way of saying the health probe passes at a high level, but the underlying instance isn't fully restored—metrics at 0% CPU/RAM confirm it's not running. This has spiked in Q&A forums post the September 2025 billing update, often resolving in 24-72 hours automatically, but you shouldn't wait if it's production-impacting.

Immediate Diagnostics and Checks

Before escalating, rule out simple blockers—though it sounds like you've covered the basics.

1. Verify Subscription and Payment Status:
   • In Azure portal, go to Subscriptions > Your subscription > Overview—ensure it's "Active" with no warnings. Check Cost Management + Billing > Invoices for the reactivation payment (it processes in 5-15 minutes).
   • CLI Check: az account show --query "{subscriptionId:id, state:state}" and az postgres flexible-server show --resource-group <rg> --name <server-name> --query "{status:status, provisioningState:provisioningState}". If provisioningState is "Updating" or "Suspended," it's still processing.
2. Review Resource Health and Activity Logs:
   • In Azure PostgreSQL Flexible Server > Your server > Resource health, note the exact start time of the "Downtime" event and any resolution ETA. Click "View events" for details like "Server reactivation initiated."
   • Go to Activity log (under Monitoring) and filter for "Administrative" operations on your server since payment—look for "Suspend" to "Resume" transitions or errors like "TransientFailure."
   • Enable Diagnostics: If not already, set up Diagnostic settings > Send to Log Analytics to query for "PostgresServerBusy" events. This helps in support tickets.
3. Test Connectivity and Metrics:
   • Retry connection: psql "host=<server-name>.postgres.database.azure.com port=5432 dbname=postgres user=<admin>@<server> sslmode=require" with your password. If it times out, confirm firewall rules (allow your IP) and VNet if private endpoint is used.
   • In Metrics, chart CPU/Memory/Connections over 24 hours—zeros since reactivation confirm the stall. If partial spikes appear, it might be a networking issue.

Steps to Force Reactivation or Accelerate

You can't truly "force" from the user side (to avoid data loss), but these escalate or bypass the block.

1. Retry Operations with Delays:
   • Wait 15-30 minutes post-payment, then attempt restart again: In portal Overview > Restart, or CLI: az postgres flexible-server restart --resource-group <rg> --name <server>. If "Busy" persists, script retries:

     
          for i in {1..10}; do
     
            az postgres flexible-server restart --resource-group <rg> --name <server> && break || sleep 300
     
          done
     
     

   • Scale Temporarily: Try Compute + storage > Scale to a higher vCore (e.g., from Burstable B1 to General Purpose D2s) then back—this can jolt the provisioning state. But if busy, it'll fail similarly.
2. Create a Failover or New Server:
   • If high availability is enabled (zone-redundant), trigger failover: High availability > Failover to the standby replica—this often unsticks the primary without data loss.
   • Quick Workaround: Export data (if accessible via read replica or pre-suspension backup) and provision a new server. Use Backups > Restore from a point-in-time (up to 35 days retained) to a new server name. CLI: az postgres flexible-server restore --resource-group <rg> --name new-server --backup-from-restore-point <restore-point> --location <region>.
   • Migrate Data: Once new server is up, use pg_dump/pg_restore or Azure Database Migration Service (free tier) to transfer.
3. Escalate to Microsoft Support:
   • Open a Priority Ticket: In portal Help + support > New support request, select Issue type: Technical > Service: Azure Database for PostgreSQL > Problem: Availability/Connectivity. Set Severity: Critical (C - >4 hours impact) since it's a full outage post-reactivation. Provide:
     • Server name, RG, subscription ID.
     • Timestamps: Suspension date, payment confirmation, first "Unavailable" sighting.
     • Screenshots of Resource Health, Activity Log, and error JSON.
     • Mention production reliance for faster routing—responses start in 1 hour for Critical.
   • Billing Angle: If suspension was recent, add a separate Billing request for "Subscription reactivation delay" to expedite.
   • Phone Support: If you have a support plan (or free for technical), call Azure support at your region's number (find via portal > Help + support > Contact support). Reference the ticket ID and push for engineer intervention—they can force-resume from the backend.
   • Community Escalate: Reply in this Q&A with your ticket number for moderator visibility, or tag @AzureDatabases on Twitter/X for public nudge.
4. Prevent Future Issues:
   • Enable Auto-Pause (in Compute + storage) to avoid full suspensions—server pauses after inactivity but resumes instantly.
   • Set Billing Alerts: In Cost Management > Budgets, create a low-balance alert to catch payment lapses early.
   • Use Read Replicas: For critical apps, always have a geo-redundant replica to failover manually.
   • Backup Strategy: Schedule automated exports to Blob storage via Azure CLI scripts.

Most cases like this resolve within 24 hours via support intervention, often with the platform team manually kicking off the resume process. In the meantime, the restore-to-new-server approach keeps you moving. If you share your server details (anonymized) or the exact Activity Log events, I can refine these steps further—hang in there!

Best Regards,

Jerald Felix

Hi Diego Armas,

Thank you for reaching on Microsoft Q&A!

Could you please provide the following details to understand the issue better

• Are you able to access other resources in azure after reactivating the subscription? or you are facing issues with PostgreSQL?
• Have you checked logs of the server have you seen any Maintenance notifications like Unavailable(unplanned)?
• If possible, can share the screenshot of the server whether you are able to see in azure portal or not.

Looking forward to your response.

Thanks!

Kalyani